Sonosax SX-R4 User Manual - Hardware Description Manual de usuario Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 19
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
SONOSAX SX-R4 User manual / Hardware description Page 17 of 19
8. SPECIFICATIONS
All specifications mentioned hereafter apply to standard models only. SONOSAX SAS SA reserves the right
to modify these characteristics at any time without prior notice.
For measures and/or settings the reference is: 0dBu = 0.775V (i.e. +6dBu = 1.55V).
8.1 SUMMARY OF CHARACTERISTICS
Audio connections
Mic/Line input
Mode: electronically balanced, transformer-less, with RF Filter
Impedance: 2.2kΩ
Connector: XLR3 female
Max input level: +26dBu (with PAD and Limiter, compression 6dB)
Limiter: Threshold at -2dBFS
Range of GAIN Potentiometer: 40dB
Noise: < -128dBu (150Ω, at max gain)
Dynamic: 114dB
THD: < 0.01% (-10dBFS, 1kHz)
Bandwidth, gain 40dB: 10Hz (–1dB) to 72kHz (-3dB)
PAD attenuator: 20dB
LF Cut filter: 135Hz, 6 dB/oct
Input Level for 0dBFS
GAIN Trim
potentiometer
GAIN Switch PAD
+20dBu minimum LO ON
-20dBu maximum LO ON
0dBu minimum LO OFF
-40dBu maximum LO OFF
-20dBu minimum HI OFF
-60dBu maximum HI OFF
Stereo Line input
Mode: unbalanced stereo / two-channel
Impedance: < 6kΩ
Connector: mini XLR3 male
Max input level: +25dBu
Potentiometer range: 35dB
Dynamic: 114dB
THD: < 0.01% (-10dBFS, 1kHz)
Bandwidth: 10Hz (–1dB) to 72kHz (-3dB)
Input Level for 0dBFS: -10dBu to +25dBu
Sub-Out
Mode: unbalanced stereo / two-channel
Output impedance: < 50Ω
Load impedance: minimum 50 Ω
Connector: mini XLR3 male
Max output level: +12dBu
Potentiometer range: 35dB
Dynamic: 106dB
THD: < 0.01% (-10dBFS, 1kHz)
Bandwidth: 10Hz (–1dB) to 72kHz (-3dB)
Output Level for –18dBFS: -29dBu to +6dBu
AES input
Mode: 4 channels AES/EBU, transformer-less (AES3)
Connector: Accessory 3M 26 pin
Impedance: 110Ω
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios